If you're looking to give your vehicle a sleek and stylish look, tinting your lights can be a great option. One popular product for tinting lights is the E Tech Lens Tint Spray Smoked. In this article, we will provide you with a comprehensive guide on how to use this product effectively to achieve the desired results.
Preparation Instructions
Before applying the E Tech Lens Tint Spray Smoked, it is important to properly prepare the surface of your lights. Follow these steps:
- Wash the light to remove all dirt and dust, and dry it thoroughly.
- Mask off the area around the light lens to avoid overspray.
- Clean the light lens surface by wiping around the area to be tinted using the E-TECH Cleaning Wipe Sachet. Make sure the area is completely free of all traces of oil, grease, wax, polish, dirt, dust, and moisture.
- Ensure the light lens surface is dry before applying the tint.
Tint Spray Application
Once you have properly prepared the surface of your lights, you can proceed with the application of the E Tech Lens Tint Spray Smoked. Follow these steps:
- Shake the can vigorously for 2-3 minutes to ensure proper mixing of the tint.
- Perform a compatibility test by spraying a small amount of tint spray on an inconspicuous area similar to the one you are planning to tint. If there is any sign of a negative reaction, do not use the product.
- Check the valve by performing a short spray before applying to the lens.
- Hold the can 20-30cm from the lens and spray in thin layers using smooth horizontal and vertical strokes to avoid sags and runs.
- If a second coat is required, allow the tint to dry to a tacky film for approximately 5 minutes before applying the second coat. It is recommended to apply a light tint to avoid impairing the brightness of your lights.
It is important to note that the E Tech Lens Tint Spray Smoked should not be applied in temperatures below 55°F (13°C) as this can affect the performance of the product. If the temperature is below the recommended range, you can warm the light lens using a hair dryer or apply the tint in a warm and ventilated area.
Please be aware that prolonged UV exposure and weathering can damage polycarbonate light lens surfaces, especially as the vehicle gets older. If the lens on your vehicle is damaged, oxidized, scratched, or cracked, the lens tint may react with the exposed surface of the polycarbonate. In such cases, it is recommended to use a fine cutting compound and a buffing wheel to restore the headlight back to a clear state. Consult a reputable body shop for guidance on this process.
How Long Does It Take for E Tech Lens Tint to Dry?
The drying time of the E Tech Lens Tint Spray Smoked depends on various factors, including temperature and the number of coats applied. Generally, the tint spray will dry to a tacky film within approximately 5 minutes. However, it is recommended to wait for at least 1 hour before handling or applying a clear coat to ensure the tint is fully dry and set.
Frequently Asked Questions
- Can I apply the E Tech Lens Tint Spray Smoked in cold temperatures?
- What should I do if the lens on my vehicle is damaged?
- How many coats of tint should I apply?
No, the tint spray should not be applied in temperatures below 55°F (13°C) as this can affect its performance. If the temperature is below the recommended range, warm the light lens using a hair dryer or apply the tint in a warm and ventilated area.
If the lens on your vehicle is damaged, oxidized, scratched, or cracked, the lens tint may react with the exposed surface of the polycarbonate. In such cases, it is recommended to use a fine cutting compound and a buffing wheel to restore the headlight back to a clear state. Consult a reputable body shop for guidance on this process.
It is recommended to apply a light tint to avoid impairing the brightness of your lights. If a second coat is required, wait for the first coat to dry to a tacky film (approximately 5 minutes) before applying the second coat.
By following the proper preparation instructions and application techniques, you can achieve the desired smoked look for your lights using the E Tech Lens Tint Spray Smoked. Remember to always read and follow the instructions provided by the manufacturer for best results.
If you want to know other articles similar to E tech lens tint spray smoked: ultimate guide you can visit the Automotive category.
Related Articles